Part Number Hot Search : 
150LR80A 21Y100K HDCE188G M3024 1N4752 AT28C64B C1622 1N5232
Product Description
Full Text Search
 

To Download 2SD1781K Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 2SD1781K
Transistors
Medium Power Transistor (32V, 0.8A)
2SD1781K
Features 1) Very Low VCE(sat). VCE(sat) = -0.1V(Typ.) IC / IB= 500A / 50mA 2) High current capacity in compact package. 3) Complements the 2SB1197K. External dimensions (Unit : mm)
2.90.2 1.90.2 0.95 0.95 (1) (2) 1.1+0.2 -0.1 0.80.1
(3) 0.4 +0.1 -0.05
1.6+0.2 -0.1
2.80.2
0~0.1
Structure Epitaxial planar type NPN silicon transistor
All terminals have same dimensions
0.3~0.6
+0.1 0.15 -0.06
ROHM : SMT3 EIAJ : SC-59
Abbreviated symbol : AF
(1) Emitter (2) Base (3) Collector
Denotes hFE
Absolute maximum ratings (Ta=25C)
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Limits 40 32 5 0.8 1.5 200 150 -55 to +150 Unit V V V A (DC) A (Pulse) mW
C C
Single pulse Pw=100ms
Rev.A
1/3
2SD1781K
Transistors
Electrical characteristics (Ta=25C)
Parameter
Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance
Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob
Min. 40 32 5 - - - 120 - -
Typ. - - - - - 0.1 - 150 15
Max. - - - 0.5 0.5 0.4 390 - -
Unit V V V IC=50A IC=1mA IE=50A VCB=20V VEB=4V
Conditions
A A
V - MHz pF
IC/IB=500mA/50mA VCE=3V, IC=100mA VCE=5V, IE= -50mA, f=100MHz VCB=10V, IE=0A, f=1MHz
Packaging specifications and hFE
Package Code Type 2SD1781K hFE QR Basic ordering unit (pieces) Taping T146 3000
hFE values are classified as follows :
Item hFE Q 120 to 270 R 180 to 390
Electrical characteristic curves
1000
500
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
Ta=25C VCE=6V
400
1000
Tc=25C 1mA
500
VCE=5V
Ta=100C
100 50 20 10 5 2 1 0.5 0.2 0.1 0
300
800A 700A 600A 500A 400A 300A 200A 100A IB=0A 8 10
DC CURRENT GAIN : hFE
200
900A
200 100 50
25C -55C
200
100
20 10 1
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
0
0
2
4
6
2
5
10 20
50 100 200 500 1000
BASE TO EMITTER VOLTAGE : VBE (V)
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
COLLECTOR CURRENT : IC (mA)
Fig.1
Grounded emitter propagation characteristics
Fig.2
Grounded emitter output characteristics
Fig.3
DC current gain vs. collector current
Rev.A
2/3
2SD1781K
Transistors
COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV)
COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV)
1000 500 200 100 50 20 10 5 1 2 5 10 20
500
TRANSITION FREQUENCY : fT (MHz)
Ta=25C
1000
lC/lB=10
1000 500
Ta=25C VCE=5V
200 100 50 20 10 5 1 2 5 10 20 50 100 200 500 1000
Ta=100C 25C -55C
200 100 50
IC/IB=50 20 10
20 10 -1 -2 -5 -10 -20 -50 -100 -200
50 100 200
500 1000
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
EMITTER CURRENT : IE (mA)
Fig.4 Collector-emitter saturation voltage vs. collector current ( )
Fig.5 Collector-emitter saturation voltage vs. collector current (
Fig.6
)
Gain bandwidth product vs. emitter current
COLLECTOR OUTPUT CAPACITANCE : Cob (pF)
50
Ta=25C f=1MHz IE=0A
EMITTER INPUT CAPACITANCE : Cib (pF)
100
200 100 50
Ta=25C f=1MHz IC=0A
20
10
20 10 5 0.1 0.2 0.5 1.0 2.0 5.0 10
5
0.1 0.2
0.5 1.0 2.0
5.0 10
20
50
COLLECTOR TO BASE VOLTAGE : VCB (V)
EMITTER TO BASE VOLTAGE : VEB (V)
Fig.7 Collector output capacitance vs. collector-base voltage
Fig.8
Emitter input capacitance vs. emitter-base voltage
Rev.A
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1


▲Up To Search▲   

 
Price & Availability of 2SD1781K

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X